How Your Water Guy Can Help You With Your Digester

Articles

Meet the Team – Employee spotlight: Jeff Freitag – Director of Sales.

Tufts University School of Medicine found that more than 617,000 hospitalizations from 1991 to 2006 were related to three common opportunistic waterborne pathogens.

60 Seconds with Jon Tiegs

Meet the Team – Employee spotlight: Jon Tiegs, Vice President.

National Healthcare Safety Network Surveys

Download the annual surveys from the CDC's National Healthcare Safety Network.

CMS Requires Water Management Plans

CMS says WMP's are necessary to be compliant.

CMS Requirement to Reduce Legionella Risk

CMS Memo to State Survey Directors

CDC Toolkit for Legionella Water Management Plans

This toolkit is designed to help people understand which buildings and devices need a Legionella water management program to reduce the risk for Legionnaires’ disease.

Emulsion Polymers in Dairy Wastewater Pretreatment

3 Key factors to consider when feeding an emulsion polymer.

CDC VitalSigns 2017

Legionaires' Disease – A problem for health care facilities.

CWT Brochure

When you see CWT you have one of the industry’s best working for you.

AWT Code of Ethics

Certified Water Technologists Code of Ethics

AWT Environmental Statement

AWT Environmental Statement The Association of Water Technologies (AWT) is an association of over 500 U.S. and international water treatment companies that provide water treatment programs for many diverse institutional, commercial and industrial water users.

U.S. Utility Executives' Water Worries

An article from Forbes addressing the importance of water to utility industry executives.

BSRIA Building Energy Consumption Guide

A guide describing a process for assuring that building design intention matches actual energy consumption.

Water Hardness Map

Map of the U.S. identifying the hardness of water in milligrams per liter in specific locations.

Improve Efficiency for Gas-Fired Boilers

Guidelines to improve boiler performance allowing you to achieve more cost effective maintenance of a steam system.

5 Effective Heat Recovery Scenarios

Five examples of how a plate heat exchanger can provide benefits for process heating applications.

Legionella & Legionellosis Prevention

Legionella guide from the World Health Organization.

EPA Boiler Emission Rules

Environmental Protection Agency rules governing large and small boilers used at area source facilities.

Avoiding Fouled Exchangers

Causes and solutions to fouling in heat exchangers.

Optimize Heat Exchangers

Strategies to optimize heat exchanger efficiency.

Chemically Treat Water to Control Problems

Identifying problems that a good water management system can control.

Importance of Boiler Logs

Boiler logging will reduce accidents, downtime, and equipment loss.

Water Maintenance and Boiler Scaling

Scale in boiler water systems is a very common issue. Consult with water treatment specialists to treat and prevent it.

Suggested Daily Boiler Log Program

A list of instrument readings to be taken daily and recorded in your boiler log.

Energy Management Basics

Energy management basics that should be a part of your everyday checklist routine.

Installation of Safety Valves

Partial listing of sizing and installation highlights for steam pressure system safety valves.

Guide to 50% Energy Savings

Guide to achieving 50% energy savings toward a net-zero energy building.

Water Treatment in Closed Systems

A guide to understanding chemical water treatment in cooling and boiler water systems.

Understanding Boiler Conductivity

A brief guide to better understanding boiler water conductivity.

Cooling Equipment Fall Shutdown

Information for proper fall shutdown of cooling equipment.

Building Energy Reduction Measures

Decrease your energy costs by using these proven effective guidelines.

Limit Water and Energy Use

Solutions for water use and energy reduction in order to increase your bottom line and protect the environment.

Ethanol Producer Water Conservation

Ideas to limit water use in ethanol production utilizing a "reduce, reuse, recycle" frame of mind.

Understanding the Water Footprint

Understanding our water footprint in order to better conserve water.

Reduce Costs with Step-down Filtration

Filtration using step-down particle retention can help reduce operating costs and achieve cleaner solutions.

Modern Chemistry and Industrial Water Treatment

Innovative chemistries, optimization of systems and water conservation as these topics relate to scale, corrosion and microbiological prevention.

Facilities Management - Benchmarking Systems

Benefits of online benchmarking systems for facilities management.

Why Know the Cost of Steam?

Knowing the cost of steam to improve your bottom line.

Energy Metrics for Buildings

Understanding energy metrics to limit energy use.

Saving Water in Dairy Operations

New ways to save water in dairy processing.

Facilities Energy Management

Energy reduction strategies for optimizing your bottom line.

5 Tips for Improving Safety Performance

Five helpful tips for integrating environment, health and safety into company culture.

Choosing a Chemical Feed Pump

Different selections of pumps for boiler water applications.

Zero Blowdown in Cooling Water Systems

Reduce your blowdown need to zero and cycle water without limit.

Boiler System Key Performance Indicators

Identifying key components of the boiler system and how water chemistry relates to Key Performance Indicators.

Piping Dead-Legs Warnings

Piping dead-legs, source of plant maintenance and safety incidents.

Starting a Boiler after Lay-Up

Necessary steps that need to be taken prior to starting boilers after a lay-up period.

Operating Cooling Towers in Freezing Weather

Ice control and different ice formations in various types of cooling towers.

Saving Water to Save Energy

Important connections and opportunities between water and energy.

Importance of Boiler Water Treatment

Water Quality Guidelines

Guidelines for maintaining optimal water quality in evaporation cooling equipment.

Cooling Tower Maintenance Check List

A checklist for monthly cooling tower maintenance.

Conversion Factors

Table of conversion factors.

Building-Associated Legionnaires Disease

10 ways that you can save time and money, prevent litigation and illness, and maybe even save a life as they relate to Legionella.

Minimizing Energy Costs with Free Cooling

Free cooling helps you reduce refrigeration energy consumption by using evaporative cooling equipment to produce chilled water in cool weather.

Boiler Logs Can Reduce Accidents

Explaining the different types of boiler logs, what these logs can tell you, and who is all responsible for these logs.

Primer on Polymer Handling

Benefits of using liquid polymers in water-treatment applications and accommodating their unique characteristics.

What to Consider When Selecting Green Cooling Towers

Criteria you should consider when evaluating your next cooling tower purchase.

Plants Often Miss Opportunities to More Fully use Hot Water

Tips from Chemical Processing to make fullest use of its hot water, and thus cutting energy consumption.

How To Destroy a Boiler Part 1

Part 1 - Describing some potentially catastrophic events that power and recovery boilers are prone to if not properly maintained.

How to Destroy a Boiler Part 2

Part 2 - Describing some potentially catastrophic events that power and recovery boilers are prone to if not properly maintained.

How to Destroy a Boiler Part 3

Part 3 - Describing some potentially catastrophic events that power and recovery boilers are prone to if not properly maintained.

Water Management Guide

General water management guide for facility managers.

Energy Savings in Large Office Buildings

Strategies for reducing energy savings in large office buildings by up to 50%.

Modern Cooling Tower Considerations: Sustainability & Efficiency

Sustainable and operational benefits of molded, HDPE cooling towers.

Preventing Boiler Scale

Maintenance requirements to prevent scale from occurring in your boiler.

Water Optimization in Chemical Plants

Optimization efforts taken by several chemical manufacturers to reduce their water footprint.

How to Improve Cooling Tower Efficiency

Understanding the key components of cooling towers and how to improve water efficiency.

Preventing Legionellosis Part 1

How to prevent/minimize Legionella in your water systems.

Blogs

Side Stream Filtration

Side stream filtration is an important but often overlooked component of an effective cooling water treatment program.

New Year’s Resolutions for Industrial Water Treatment

January is a great time to reassess business strategies and include some water treatment resolutions that could improve the health of your company.

Biocides and Disinfectants – Applications, Benefits and Best Practices

Biocides can be used for many applications including healthcare, food & beverage, industrial, and commercial. Choosing the proper disinfection technology is critical.

Water-Energy Nexus – Save water. Save energy.

Water and energy are very much interrelated and dependent upon one another, this co-dependency is called the Water-Energy Nexus.

Pulse~Pure® – A Chemical-Free Water Treatment Solution

Are you considering a chemical-free, cooling water treatment solution? It is important to fully understand your system design and the unique characteristics of your application when making a decision.

Are You Ready for Cooling Layup / Boiler Startup?

Being proactive and thorough in your approach to maintenance saves time and money in the long run.

CannedWater4Kids – Drinking Water with a Purpose

Canned Water for Kids (cW4K) is a great local charity that is making a global impact to help ensure all children have access to clean, safe drinking water.

How to Make the Right Call When Ordering Glycol?

Ordering and receiving a glycol delivery should be a fairly straightforward and easy process; however, it takes some insight and planning to avoid complications.

Chloride Reduction Can Reduce Operating Costs & Minimize Impact on the Environment

Making changes in how you use salt in your facility can help protect our fresh water resources, and potentially reduce your operating costs.

The Hard Facts: Water Softener Tune-ups Help Maximize Water Quality and Reduce Cost!

Softeners are a critical component to the water treatment system. They help remove minerals to reduce scale and build-up in piping and heat transfer equipment.

Do You Know "Sloppy Sludge" from Shinola?

Sloppy sludge is a challenge in wastewater treatment. It pays to be informed on treatment equipment and how chemicals can impact this process.

Top Reasons an Organization Should Prioritize Safety?

Having a team that has been trained in proper safety procedures and practices ensures not only their own safety, but also the safety of customers.

The Impact of Switching to Lake Michigan Water on Waukesha’s Commercial & Industrial Users

The water characteristics of Waukesha’s existing water supply and Lake Michigan water are quite different and will require users to consider how they manage their boiler and cooling water water treatment..

How to Install and Maintain Boiler Conductivity Electrodes

Learning how to properly install and maintain your boiler conductivity electrode will help improve the performance of your boiler.

12 Days of Service

A holiday blog highlighting 12 days of service in the water industry. Happy 2017. Thank you for your partnership.

Have You Hugged Your Boiler Today?

How you maintain and operate your steam boiler has a direct effect on the amount of energy, water and chemicals it uses.

Avoid Giving Your Coils the Deep Freeze This Winter!

Now is the time to ensure your system's HVAC coils are freeze protected and working properly. A frozen coil not only causes water damage, there is also the replacement cost and downtime for repairs when it is least convenient.

When Good Boilers Go Bad. Common Problems that Shorten the Life of Your Boiler!

This article outlines a few common problems that can damage or destroy a boiler. Providing proper water treatment and regular maintenance can help prolong equipment life.

Better Water Management - An Opportunity to Improve Sustainability and Reduce Cost

Industrial facilities use large amounts of fresh water. By reducing water usage, facilities also achieve reduced energy cost, chemical cost savings, and other benefits.

Improving Patient Safety Through Stronger Water Management

While it is important to be compliant with the latest laws and regulations, the focal point of any effective Water Management Plan should put patient safety first.

Choosing The Right Sanitizer Can Help You Master Food & Beverage Biological Wastewater Treatment

Sanitizers are required in food and beverage facilities. Choosing the right sanitizer can impact wastewater treatment.

Is Your Vendor a Supplier or a Partner?

When a vendor relationship is built on trust, good communication, and a sincere investment in your business, it will drive meaningful value and a sustained competitive advantage.

What to Consider When Selecting the Right Biocide

Choosing the right biocide saves money, by reducing downtime and maintenance costs, and increasing production efficiency.

Cooling System Preseason Checklist

The time invested in preparation for cooling system start-up can pay big dividends later in the season.

How to Make Cooling System Start-up a Breeze This Year

Proper preparation in the preseason is critical to ensure system efficiency, sustainability, and dependability.

6 Benefits of Employee Training & Development

An effective employee training strategy can help employees be more productive, confident and boost moral.

Healthy Microbes Are Key to “Superstar” Wastewater Management

Bioaugmentation can be a game-changer for wastewater management, breaking down organic matter and cleaning up waste streams.

Feedwater Tank vs. Deaerator: How to Choose

A comparison of feedwater tanks and deaerators for storing and treating boiler feedwater.

How Your Water Guy Can Help You With Your Digester

Waste-to-energy initiatives can greatly benefit communities by mitigating various environmental concerns like pathogen control, odor control, and groundwater contamination.

Tapping into water savings? Your first step is a site audit.

A site audit can identify ways to reduce water, chemical, and energy usage.

Watertech an Exhibitor at the 2016 WHEA Technical Exhibition

Watertech is an exhibitor at the 2016 WHEA Technical Exhibit in Green Bay

The Cost (Savings) of Automation

Automation allows facility managers and water system operators to be more efficient.

Why It Pays to Promote Your Sustainability Successes

Driving down the cost of water through initiatives that reduce and recycle water is good for business and good for the environment.

Lombardi Walk/Run To Tackle Cancer

Vince Lombardi Walk/Run to Tackle Cancer - Milwaukee

Drive Down Water Costs Immediately With These Simple Steps

Between the price volatility of water, a growing concern for freshwater supply, and the necessity of water use in production processes, maintenance, and human consumption, it can be difficult for business owners and facility managers to manage water use in a way that is both good for business and good for the environment.

Cooling Tower Operation and Maintenance is the Key for Improved Energy Efficiency

Are you showing your cooling tower the TLC it needs to be running at its peak performance efficiently?

Boiler Shutdown

If proper care is not taken during the shutdown stage, these solids can settle out in drums and tubes and dry to a hard, tightly held deposit that could require chemical or severe mechanical cleaning.

Continuous Blowdown Method of Boiler Layup

The CDP or Continuous Blowdown method of boiler layup consists of piping continuous surface blowdown from the operating boiler to the bottom of the stand-by boiler.

Maintaining Cycles of Concentration

Your water treatment specialist can help you determine what the maximum number of cycles is for your system.

Measuring and Controlling Dissolved Solids

Your water treatment company can help you set surface blowdown conductivity control limits that maintain the dissolved solids in a safe, economical range.

How a Surface Blowdown System Works

Take a look at how a typical surface blowdown system works.

June 28th Symposium and Open House

On June 28th Watertech of America celebrated our first annual Symposium and Open House!

How to Meet New Phosphorus Limits with Wastewater Management

Don’t be dissuaded by new regulations designed to reduce phosphorus in the Great Lakes Region watershed. Take a holistic wastewater management approach to meet discharge limits and keep you in regulatory compliance.

Steps to Bottom Blowing a Boiler

Preferred method of performing the bottom blowdown.

Boiler Blowdown

Why blow down your boiler? What happens if solids build up in the boiler?

Guide to Performing Boiler Blowdown

Today's blog will get into the actual process of boiler blowdowns

Two Methods to Boiler Blowdown

Did you know that there are different kinds of boiler blowdown?

Adjusting your Feedwater Temperature

Increasing your feedwater temperature to above 180 degrees F will help reduce your chemical usage of oxygen scavenger, increase your efficiency and reduce thermal stress.

Cycles of Concentration in a Cooling Water System

Water treatment programs should maximize the frequency at which its water is cycled to prevent scaling.

Surface Blowdown

Surface blowdown and removal of dissolved solids

Efficient Summer Cooling Tower Operation

Hopefully you have been busy getting your cooling water systems ready for the demand of the coming months

Boiler Blowdown-Bottom Blowdown

Bottom Blowdown is used to remove suspended solids that build up in the boiler water

Cycling Up Water in a Recirculating Cooling Tower System

As the water evaporates in a cooling tower system, it leaves behind all of the dissolved solids that were present in the fresh makeup water used to replenish system losses

Feedwater Temperature

What is a target temperature for your feedwater?

Choosing the Best Oxygen Scavenger for Your Boiler System

It is well known that one of the greatest threats to the integrity of a steam system is corrosion due to the effects of dissolved oxygen.

OSHA Compliance with Global Harmonization System (GHS)

OSHA aligning their Hazard Communication System (HCS) with the UN's Globally Harmonized System (GHS)

WATERTECH Youtube Channels

Watertech's Media!

Who Are Water Professionals

There are many people in the community that spend good parts of their day managing water.

Starting Up a Boiler After Summer Layup

Before you fire up your boiler, there are some steps one should take to insure the boiler is functioning properly and efficiently.

Guidelines for Detecting Microorganisms in Cooling Water Systems

Shedding some light on the causes behind cooling water contamination

Microorganisms in Cooling Water Systems

Plant operators focus their attention on controlling scale and corrosion, but often neglect monitoring for microorganism growth and the accumulation of silt and other foulants.

Polymer Flocculants in Detail

This blog, we will go deeper into discussion about each type of flocculants.

Polymer Flocculants

Polymer flocculants, what are they? and what are they used for?

Legionnaire's Disease in the News

July 23, 2013: Our community is currently experiencing a larger than normal rate of legionella infections, including 29 suspect and confirmed cases in Milwaukee County, 19 of which are in the city of Milwaukee.

Membrane Filter Tests

Running these membrane filter tests can keep your system running more efficiently

Identifying Problem Condensate Areas Using Membrane Filters

Boiler plant operators are becoming increasingly aware of the importance of their steam condensate systems.

Membrane Filter Procedure

Sampling for iron in condensate systems using the membrane filter procedure

Boiler Oxygen Corrosion

The damage caused by oxygen can be extensive and quite costly

Controlling Oxygen Corrosion

Mechanical deaeration and chemical deaeration are the methods for controlling this corrosion

Deaerator / Feedwater Heater Performance

If you find you are using an excessive amount of oxygen-scavenging chemicals, you may want to investigate the performance of your deaerater (DA) or feedwater heater

Deaerator Inspection List

A properly operating deaerator is one of the most important pieces of equipment in a boiler room

Inefficiency of Deaerators

Deaerators play a vital role in the efficient production of steam, but you may find as time goes on their performance begins to decline. Here is a troubleshooting list that may be used to help identify the source of the decreased performance

2 Methods of Steam Monitoring

Accurate and easy monitoring of steam purity can help minimize the occurrence and degree of carryover and thus guarantee a trouble free operation.

Steam Monitoring for Carryover Introduction

Contaminants can cause post-boiler problems by leaving deposits or causing corrosion in critical areas of the steam system.

Steam Purity Measurement

An important factor in the efficient operation of a modern boiler system is the ability to accurately measure the level of carryover or steam purity.

Resin Background and Sampling

Use resins that will allow the system to operate at peak efficiency and maximum cost effectiveness

CALL (414) 425-3339