CALL (414) 425-3339

Drop Test Kits with EndPoint ID

Color Coded

All of the reagents are color coded to match the EndPoint ID instructions. This helps operators to distinguish between the many test kits that they use and ensures that they are always using the correct reagents.

Photographic Instructions

Often the most difficult part of conducting water analysis is to see the color changes. Our instructions include photographs of the different test stages. These photos very clearly show the color changes that should be seen when running the test.

Simplified Calculations

The instructions provide simple, step-by-step calculations to produce the correct results after the tests have been completed.

 
Click to search the Knowledge Center
 
Product Information
Sulfite Drop Count Test Procedure

Sulfite Drop Count Test Procedure
Product Information
Calcium Hardness Drop Count Test Procedure

Calcium Hardness Drop Count Test Procedure
Blog
Is Your Vendor a Supplier or a Partner?

Blog
Feedwater Tank vs. Deaerator: How to Choose

Articles
Hmong Vang joins Watertech as Application Specialist

Watertech has added Hmong Vang as Application Specialist
Blog
Guide to Performing Boiler Blowdown

Today's blog will get into the actual process of boiler blowdowns
Product Information
Organophosphonate Drop Count Test Procedure

Organophosphonate Crop Count Test Procedure
Product Information
Hardness Total Drop Test - Endpoint ID™ Procedure

Total Hardness Drop Count Test Procedure
Blog
What to Consider When Selecting the Right Biocide

Blog
How Your Water Guy Can Help You With Your Digester

Blog
June 28th Symposium and Open House

On June 28th Watertech of America celebrated our first annual Symposium and Open House!
Blog
Two Methods to Boiler Blowdown

Did you know that there are different kinds of boiler blowdown?
Product Information
Nitrite Drop Count Test Procedure

Nitrite Drop Count Test Procedure
Product Information
Chloride Drop Count Test Procedure

Chloride Drop Count Test Procedure
Blog
Cooling System Preseason Checklist

The time invested in preparation for cooling system start-up can pay big dividends later in the season.
Blog
Tapping into water savings? Your first step is a site audit.

Blog
Steps to Bottom Blowing a Boiler

Preferred method of performing the bottom blowdown.
Blog
Adjusting your Feedwater Temperature

Increasing your feedwater temperature to above 180 degrees F will help reduce your chemical usage of oxygen scavenger, increase your efficiency and reduce thermal stress.
Product Information
Trace Hardness Drop Count Test Procedure

Trace Hardness Drop Count Test Procedure
Product Information
P&T Alkalinity Drop Test - Endpoint ID™ Procedure

P/T Alkalinity Drop Count Test Procedure
Blog
How to Make Cooling System Start-up a Breeze This Year

Blog
The Cost (Savings) of Automation

Blog
Boiler Blowdown

Why blow down your boiler? What happens if solids build up in the boiler?
Blog
Choosing the Best Oxygen Scavenger for Your Boiler System

It is well known that one of the greatest threats to the integrity of a steam system is corrosion due to the effects of dissolved oxygen.

 

PRODUCTS & SERVICES